





 |
-
J. K. Brimacombe Selected References
Liu, Z.-D., Jin, D.Q., Samarasekera, I.V., Brimacombe, J.K. Application
of microstructure engineering in steel coil cooling process (2005)
Journal of Iron and Steel Research International, 12 (2), pp. 37-44.
Konishi, J., Militzer, M., Brimacombe, J.K., Samarasekera, I.V. Modeling
the formation of longitudinal facial cracks during continuous casting of
hypoperitectic steel (2002) Metallurgical and Materials Transactions
B: Process Metallurgy and Materials Processing Science, 33 (3), pp.
413-423.
Pinheiro, C.A.M., Samarasekera, I.V., Brimacombe, J.K., Walker, B.N.
Mould heat transfer and continuously cast billet quality with mould flux
lubrication Part 1 mould heat transfer (2000) Ironmaking and
Steelmaking, 27 (1), pp. 37-54.
Gurton, R.M., Samarasekera, I.V., Brimacombe, J.K. Mechanical response of
continuous casting billet machines - Part I: Sensors and basic machine
response (2000) Iron and Steelmaker (I and SM), 27 (3), pp.
101-112.
Pinheiro, C.A.M., Samarasekera, I.V., Brimacombe, J.K., Howes, B., Gussias,
O. Mould heat transfer and continuously cast billet quality with mould
flux lubrication. Part 2: Quality issues (2000) Ironmaking and
Steelmaking, 27 (2), pp. 144-159.
Kumar, S., Meech, J.A., Samarasekera, I.V., Brimacombe, J.K., Rakocevic, V.
Development of intelligent mould for online detection of defects in steel
billets (1999) Ironmaking and Steelmaking, 26 (4), pp. 269-284.
Samarasekera, I.V., Brimacombe, J.K. Evolution or revolution? - A new era
in billet casting (1999) Canadian Metallurgical Quarterly, 38
(5), pp. 347-362.
Wells, M.A., Lloyd, D.J., Samarasekera, I.V., Brimacombe, J.K., Hawbolt, E.B.
Modeling the microstructural changes during hot tandem rolling of AA5XXX
aluminum alloys: Part III. Overall model development and validation
(1998) Metallurgical and Materials Transactions B: Process Metallurgy and
Materials Processing Science, 29 (3), pp. 709-719.
Kumar, S., Samarasekera, I.V., Brimacombe, J.K. Mold thermal response and
formation of defects in the continuous casting of steel billets, Part 2:
Rhomboidity (1998) Iron and Steelmaker (I and SM), 25 (12), pp.
51-66.
Wells, M.A., Lloyd, D.J., Samarasekera, I.V., Brimacombe, J.K., Hawbolt, E.B.
Modeling the microstructural changes during hot tandem rolling of AA5XXX
aluminum alloys: Part I. Microstructural evolution (1998)
Metallurgical and Materials Transactions B: Process Metallurgy and Materials
Processing Science, 29 (3), pp. 611-620.
Wells, M.A., Lloyd, D.J., Samarasekera, I.V., Brimacombe, J.K., Hawbolt, E.B.
Modeling the microstructural changes during hot tandem rolling of AA5XXX
aluminum alloys Part II. Textural evolution (1998) Metallurgical and
Materials Transactions B: Process Metallurgy and Materials Processing
Science, 29 (3), pp. 621-633.
Zietsman, J.H., Kumar, S., Meech, J.A., Samarasekera, I.V., Brimacombe, J.K.
Taper design in continuous billet casting using artificial neural
networks (1998) Ironmaking and Steelmaking, 25 (6), pp. 476-483.
Samarasekera, I.V., Muojekwu, C.A., Jin, D.Q., Brimacombe, J.K.
State-of-the-art: Hot rolling of thin slabs (1997) Mechanical Working
and Steel Processing Conference Proceedings, pp. 861-873.
Morgan, G.J., Shook, A.A., Brimacombe, J.K., Richards, G.G. Flash
converting of MK (chalcocite) concentrate - an overview (1997) TMS
Annual Meeting, pp. 161-178.
Kumar, S., Samarasekera, I.V., Brimacombe, J.K. Mold thermal response and
formation of defects in the continuous casting of steel billets - laps and
bleeds (1997) Iron and Steelmaker (I and SM), 24 (6), pp. 53-69.
Davies, C.H.J., Hawbolt, E.B., Samarasekera, I.V., Brimacombe, J.K.
Constitutive behaviour of composites of AA6061 and alumina (1997)
Journal of Materials Processing Technology, 70 (1-3), pp. 244-251.
Chandra, S., Samarasekera, I.V., Brimacombe, J.K., Bakshi, I.A., Walker, B.N.
On line monitoring of mould-shell interaction during continuous casting
of steel billets (1996) Ironmaking and Steelmaking, 23 (6), pp.
512-521.
Morgan, G.J., Brimacombe, J.K. Kinetics of the flash converting of MK (chalcocite)
concentrate (1996) Metallurgical and Materials Transactions B:
Process Metallurgy and Materials Processing Science, 27 (2), pp.
163-175.
Chen, W.C., Davies, C.H.J., Samarasekera, I.V., Brimacombe, J.K., Hawbolt,
E.B. Mathematical modeling of the extrusion of 6061/Al2O3/20p composite
(1996) Metallurgical and Materials Transactions A: Physical Metallurgy
and Materials Science, 27 (12), pp. 4095-4111.
Pinheiro, C.A., Samarasekera, I.V., Brimacombe, J.K. Mold flux for
continuous casting of steel (1995) Iron and Steelmaker, 22 (2),
pp. 37-39.
Pinheiro, C.A., Samarasekera, I.V., Brimacombe, J.K. Mold flux for
continuous casting of steel (1995) Iron and Steelmaker, 22 (3),
pp. 76-77.
Pinheiro, C.A., Samarasekera, I.V., Brimacombe, J.K. Mold flux for
continuous casting of steel (1995) Iron and Steelmaker, 22 (4),
pp. 45-47.
Pinheiro, C.A., Samarasekera, I.V., Brimacombe, J.K. Mold flux for
continuous casting of steel (1995) Iron and Steelmaker, 22 (8),
pp. 41-43.
Pinheiro, C.A., Samarasekera, I.V., Brimacombe, J.K. Mold flux for
continuous casting of steel (1995) Iron and Steelmaker, 22 (12),
pp. 43-44.
Pinheiro, C.A., Samarasekera, I.V., Brimacombe, J.K. Mold flux for
continuous casting of steel (1996) Iron and Steelmaker, 23 (1),
pp. 51-52.
Pinheiro, C.A., Samarasekera, I.V., Brimacombe, J.K. Mold flux for
continuous casting of steel (1996) Iron and Steelmaker, 23 (2),
pp. 59-60.
Pinheiro, C.A., Samarasekera, I.V., Brimacombe, J.K. Mold flux for
continuous casting of steel (1996) Iron and Steelmaker, 23 (3),
p. 85.
Brimacombe, J.K. Current and future challenges in injection metallurgy
(1996) The Howard Worner International Symposium on Injection in
Pyrometallurgy, pp. 13-17.
Hernandez-Morales, B., Brimacombe, J.K., Hawbolt, E.B. Characterization of
the boundary condition in heat treatment operations using an inverse heat
conduction algorithm (1995) American Society of Mechanical Engineers, Heat
Transfer Division, (Publication) HTD, 317-2, pp. 559-566.
Rakocevic, V., Meech, J.A., Kumar, S., Samarasekera, I.V., Brimacombe, J.K.
Computational intelligence in a real-time SCADA system to monitor and
control continuous casting of steel billets (1995) Proceedings of the IEEE
International Conference on Systems, Man and Cybernetics, 2, pp. 1653-1657.
Tuffrey, N.E., Richards, G.G., Brimacombe, J.K. Two-wavelength pyrometry
study of the combustion of sulfide minerals: Part I. Apparatus and general
observations (1995) Metallurgical and Materials Transactions B: Process
Metallurgy and Materials Processing Science, 26 (5), pp. 929-942.
Hlady, C.O., Brimacombe, J.K., Samarasekera, I.V., Hawbolt, E.B. Heat
transfer in the hot rolling of metals (1995) Metallurgical and Materials
Transactions B: Process Metallurgy and Materials Processing Science, 26 (5),
pp. 1019-1027.
Tuffrey, N.E., Richards, G.G., Brimacombe, J.K. Two-wavelength pyrometry
study of the combustion of sulfide minerals: Part III. The influence of
oxygen concentration on pyrite combustion (1995) Metallurgical and Materials
Transactions B: Process Metallurgy and Materials Processing Science, 26 (5),
pp. 959-970.
Tuffrey, N.E., Richards, G.G., Brimacombe, J.K. Two-wavelength pyrometry
study of the combustion of sulfide minerals: Part II. Galena and commercial
lead concentrates (1995) Metallurgical and Materials Transactions B: Process
Metallurgy and Materials Processing Science, 26 (5), pp. 943-958.
Pham, T.T., Hawbolt, E.B., Brimacombe, J.K. Predicting the onset of
transformation under noncontinuous cooling conditions: Part I. Theory (1995)
Metallurgical and Materials Transactions A: Physical Metallurgy and
Materials Science, 26 (8), pp. 1987-1992.
Pham, T.T., Hawbolt, E.B., Brimacombe, J.K. Predicting the onset of
transformation under noncontinuous cooling conditions: Part II. Application
to the austenite pearlite transformation (1995) Metallurgical and Materials
Transactions A: Physical Metallurgy and Materials Science, 26 (8), pp.
1993-2000.
Samarasekera, I.V., Wells, M.A., Jin, D., Hlady, C.O., Brimacombe, J.K.,
Hawbolt, E.B. Application of microstructural engineering to the processing
of lightweight materials (1995) Materials Characterization, 35 (1), pp.
69-79.
Muojekwu, C.A., Samarasekera, I.V., Brimacombe, J.K. Heat transfer and
microstructure during the early stages of metal solidification (1995)
Metallurgical and Materials Transactions B: Process Metallurgy and Materials
Processing Science, 26 (2), pp. 361-382.
Davies, C.H.J., Chen, W.-C., Hawbolt, E.B., Samarasekera, I.V., Brimacombe,
J.K. Particle fracture during extrusion of a 6061/alumina composite (1995)
Scripta metallurgica et materialia, 32 (3), pp. 309-314.
Alyaser, A.H., Brimacombe, J.K. Oxidation kinetics of molten copper sulfide
(1995) Metallurgical and Materials Transactions B: Process Metallurgy and
Materials Processing Science, 26 (1), pp. 25-40.
Meadowcroft, T.R., Brimacombe, J.K. Fathoming technology change in the steel
industry (1994) Steelmaking Conference Proceedings, 77, pp. 637-639.
Brimacombe, J.K., Samarasekera, I.V. Challenge of thin slab casting (1994) I
& SM, 21 (11), pp. 29-39.
Cockcroft, Steven L., Brimacombe, J. Keith, Walrod, Dennis G., Myles, Thomas
A. Thermal stress analysis of fused-cast AZS refractories during production:
part I, industrial study (1994) Journal of the American Ceramic Society, 77
(6), pp. 1505-1511.
Cockcroft, Steven L., Brimacombe, J.Keith, Walrod, Dennis G., Myles, Thomas
A. Thermal stress analysis of fused-cast AZS refractories during production:
part II, development of thermo-elastic stress model (1994) Journal of the
American Ceramic Society, 77 (6), pp. 1512-1521.
Kamat, R.G., Hawbolt, E.B., Brimacombe, J.K. New morphological variant of
bainite (1994) Canadian Metallurgical Quarterly, 33 (2), pp. 121-131.
Samarasekera, I.V., Brimacombe, J.K., Wilder, K. Pursuit of steel billet
quality (1994) I & SM, 21 (3), pp. 53-63.
Barr, P.V., Osinski, E.J., Brimacombe, J.K., Khan, M.A., Readyhough, P.J.
Mathematical model for tall coke oven battery part 3 integrated model and
its application (1994) Ironmaking and Steelmaking, 21 (1), pp. 44-55.
Davies, C.H.J., Chen, W.C., Samarasekera, I.V., Hawbolt, E.B., Brimacombe,
J.K. Extrusion of metal matrix composites-modelling and experiments (1994)
Proceedings of the Symposium on High Performance Metal and Ceramic Matrix
Composites, pp. 195-202.
Brimacombe, J.K. Prosperity into the next millennium built on the process
engineering of materials (1993) First International Conference on Processing
Materials for Properties, pp. 7-15.
Osinski, E.J., Barr, P.V., Brimacombe, J.K. Mathematical model for tall coke
oven battery. Part 1. Development of thermal model for heat transfer within
oven charge (1993) Ironmaking and Steelmaking, 20 (5), pp. 350-361.
Osinski, E.J., Barr, P.V., Brimacombe, J.K. Mathematical model for tall coke
oven battery part 2 calculation of gas flow and related phenomena for oven
charge (1993) Ironmaking and Steelmaking, 20 (6), pp. 453-467.
Chidiac, S.E., Brimacombe, J.K., Samarasekera, I.V. A new transient method
for analysis of solidification in the continuous casting of metals (1993)
Applied Scientific Research, 51 (3), pp. 573-597.
Kumar, S., Meech, J.A., Samarasekera, I.V., Brimacombe, J.K. Knowledge
engineering an expert system to troubleshoot quality problems in the
continuous casting of steel billets (1993) I & SM, 20 (9), pp. 29-36.
Bakshi, I.A., Brendzy, J.L., Walker, N., Chandra, S., Samarasekera, I.V.,
Brimacombe, J.K. Mould-strand interaction in continuous casting of steel
billets. Part 1. Industrial trials (1993) Ironmaking and Steelmaking, 20
(1), pp. 54-62.
Brendzy, J.L., Bakshi, I.A., Samarasekera, I.V., Brimacombe, J.K.
Mould-strand interaction in continuous casting of steel billets. Part 2.
Lubrication and oscillation mark formation (1993) Ironmaking and
Steelmaking, 20 (1), pp. 63-74.
Chandra, S., Brimacombe, J.K., Samarasekera, I.V. Mould-strand interaction
in continuous casting of steel billets. Part 3. Mould heat transfer and
taper (1993) Ironmaking and Steelmaking, 20 (2), pp. 104-112.
Davies, C.H.J., Chen, W.C., Geltser, I.S., Hawbolt, E.B., Samarasekera,
I.V., Brimacombe, J.K. Hot deformation of 6061 alumina composite materials
(1993) [No source information available]
Kamat, R.G., Hawbolt, E.B., Brown, L.C., Brimacombe, J.K. Principle of
additivity and the proeutectoid ferrite transformation (1992) Metallurgical
transactions. A, Physical metallurgy and materials science, 23 (9), pp.
2469-2690.
Mahapatra, R.B., Brimacombe, J.K., Samarasekera, I.V. Mold behavior and its
influence on quality in the continuous casting of steel slabs. Part II. Mold
heat transfer, mold flux behavior, formation of oscillation marks,
longitudinal off-corner depressions, and subsurface cracks (1991)
Metallurgical transactions. B, Process metallurgy, 22 (6), pp. 875-888.
Brimacombe, J.K., Samarasekera, I.V. Future trends in the development of
continuous-casting moulds (1991) Steelmaking Conference Proceedings, pp.
153-160.
Brimacombe, J.K. Rotary kiln - toward a new understanding of an old reactor
(1991) [No source information available]
Mahapatra, R.B., Brimacombe, J.K., Samarasekera, I.V. Influence of mould
design and operation on oscillation-mark formation, heat transfer and
quality in the continuous casting of steel slabs (1991) Metallurgia Italiana,
83 (12), pp. 1105-1112.
Samarasekera, I.V., Brimacombe, J.K. Application of mathematical models for
the improvement of billet quality (1991) Steelmaking Conference Proceedings,
pp. 55-67.
Mahapatra, R.B., Brimacombe, J.K., Samarasekera, I.V., Walker, N., Paterson,
E.A., Young, J.D. Mold behavior and its influence on quality in the
continuous casting of steel slabs. Part I. Industrial trials, mold
temperature measurements, and mathematical modeling (1991) Metallurgical
transactions. B, Process metallurgy, 22 (6), pp. 861-874.
Campbell, P.C., Hawbolt, E.B., Brimacombe, J.K. Microstructural engineering
applied to the controlled cooling of steel wire rod: part I. Experimental
design and heat transfer (1991) Metallurgical transactions. A, Physical
metallurgy and materials science, 22 (11), pp. 2769-2778.
Campbell, P.C., Hawbolt, E.B., Brimacombe, J.K. Microstructural engineering
applied to the controlled cooling of steel wire rod: part II.
Microstructural evolution and mechanical properties Correlations (1991)
Metallurgical transactions. A, Physical metallurgy and materials science, 22
(11), pp. 2779-2790.
Campbell, P.C., Hawbolt, E.B., Brimacombe, J.K. Microstructural engineering
applied to the controlled cooling of steel wire rod: part III. Mathematical
model - formulation and predictions (1991) Metallurgical transactions. A,
Physical metallurgy and materials science, 22 (11), pp. 2791-2805.
Liu, W.J., Brimacombe, J.K., Hawbolt, E.B. Influence of composition on the
diffusivity of carbon in steels. I. Non-alloyed austenite (1991) Acta
metallurgica et materialia, 39 (10), pp. 2373-2380.
Anagbo, P.E., Brimacombe, J.K., Wraith, A.E. Formation of ellipsoidal
bubbles at a free-standing nozzle (1991) Chemical Engineering Science, 46
(3), pp. 781-788.
Anagbo, P.E., Brimacombe, J.K. Plume characteristics and liquid circulation
in gas injection through a porous plug (1990) Metallurgical transaction. B,
Process metallurgy, 21 (4), pp. 637-648.
Woo, J.S., Szekely, J., Castillejos, A.H., Brimacombe, J.K. Study on the
mathematical modeling of turbulent recirculating flows in gas-stirred ladles
(1990) Metallurgical transactions. B, Process metallurgy, 21 (2), pp.
269-277.
Sahajwalla, V., Castillejos, A.H., Brimacombe, J.K. Spout of air jets
upwardly injected into a water bath (1990) Metallurgical transaction. B,
Process metallurgy, 21 (1), pp. 71-80.
Tackie, E.N., Watkinson, A.P., Brimacombe, J.K. Mathematical modeling of the
elutriation of fine materials from rotary kilns (1990) Canadian Journal of
Chemical Engineering, 68 (1), pp. 51-60.
Castillejos, E.A.H., Salcudean, M.E., Brimacombe, J.K. Fluid flow and bath
temperature destratification in gas-stirred ladles (1989) Metallurgical
transactions. B, Process metallurgy, 20 (5), pp. 603-611.
Osinski, E.J., Barr, P.V., Brimacombe, J.K. Mathematical model for gas flow
through a packed bed in the presence of sources and sinks (1989) Canadian
Journal of Chemical Engineering, 67 (5), pp. 722-730.
Sahajwalla, V., Brimacombe, J.K., Salcudean, M.E. Factors influencing the
process efficiency of Gas-stirred ladles (1989) Ironmaking and Steelmaking,
16 (10), pp. 39-42.
Castillejos, E.A.H., Brimacombe, J.K. Physical characteristics of gas jets
injected vertically upward into liquid metal (1989) Metallurgical
transactions. B, Process metallurgy, 20 (5), pp. 595-601.
Anagbo, P.E., Brimacombe, J.K., Castillejos, A.H. Unified representation of
gas dispersion in upwardly injected submerged gas jets (1989) Canadian
Metallurgical Quarterly, 28 (4), pp. 323-330.
Tackie, E.N., Watkinson, A.P., Brimacombe, J.K. Experimental study of the
elutriation of particles from rotary kilns (1989) Canadian Journal of
Chemical Engineering, 67 (5), pp. 806-817.
Brimacombe, J.Keith Extractive metallurgist in an emerging world of
materials (1989) Metallurgical transactions. B, Process metallurgy, 20 (3),
pp. 291-313.
Barr, P.V., Brimacombe, J.K., Watkinson, A.P. Heat-transfer model for the
rotary kiln: Part II. Development of the cross-section model (1989)
Metallurgical transactions. B, Process metallurgy, 20 (3), pp. 403-419.
Barr, P.V., Brimacombe, J.K., Watkinson, A.P. Heat-transfer model for the
rotary kiln: Part 1. Pilot kiln trials (1989) Metallurgical transactions. B,
Process metallurgy, 20 (3), pp. 391-402.
Cockcroft, S.L., Richards, G.G., Brimacombe, J.K. High-pressure coal
injection in zinc slag fuming (1989) Metallurgical transactions. B, Process
metallurgy, 20 (2), pp. 227-135.
Anagbo, P.E., Brimacombe, J.K. Design and performance of porous plugs in
metal refining - Part 1 (1988) I & SM, 15 (10), pp. 38-44.
Li, Zongyu, Barr, P.V., Brimacombe, J.K. Computer simulation of the slab
reheating furnace. (1988) Canadian Metallurgical Quarterly, 27 (3), pp.
187-196.
Thomas, B.G., Samarasekera, I.V., Brimacombe, J.K. Investigation of panel
crack formation in steel ingots: part i. mathematical analysis and mid-face
panel cracks. (1988) Metallurgical transactions. B, Process metallurgy, 19
(2), pp. 277-287.
Thomas, B.G., Samarasekera, I.V., Brimacombe, J.K. Investigation of panel
crack formation in steel ingots: Part II. Off-corner panel cracks. (1988)
Metallurgical transactions. B, Process metallurgy, 19 (2), pp. 289-301.
Bustos, A.A., Brimacombe, J.K., Richards, G.G. Accretion growth at the
tuyeres of a Peirce-Smith copper converter. (1988) Canadian Metallurgical
Quarterly, 27 (1), pp. 7-21.
Cockcroft, S.L., Richards, G.G., Brimacombe, J.K. Mathematical model of lead
behaviour in the zinc slag fuming process. (1988) Canadian Metallurgical
Quarterly, 27 (1), pp. 27-40.
Brimacombe, J.K., Samarasekera, I.V., Hawbolt, E.B., Barr, P.V. Thermal and
microstructural evolution in the solidification and thermomechanical
processing of steel. (1987) [No source information available]
Barr, Peter V., Richards, Joanne, Brimacombe, J.K. Heat transfer model of
the tall coke-oven flue. (1987) Iron and Steel Engineer, 64 (1), pp. 56-64.
Parsons, G.J., Brimacombe, J.K., Peters, E. Computer simulation of a
molybdenite leaching process using dilute nitric acid. (1987)
Hydrometallurgy, 17 (2), pp. 133-154.
Bustos, A.A., Brimacombe, J.K., Richards, G.G. Heat flow in copper
converters. (1986) Metallurgical transactions. B, Process metallurgy, 17
(4), pp. 677-685.
Castillejos, A.H., Brimacombe, J.K. STRUCTURE OF TURBULENT GAS-LIQUID PLUMES
IN VERTICALLY INJECTED JETS. (1986) [No source information available]
Richards, G.G., Legeard, K.J., Bustos, A.A., Brimacombe, J.K., Jorgensen, D.
BATH SLOPPING AND SPLASHING IN THE COPPER CONVERTER. (1986) [No source
information available]
Thomas, B.G., Samarasekera, I.V., Brimacombe, J.K. Application of
mathematical heat flow and stress models of steel ingot casting to
investigate panel crack formation. (1986) [No source information available]
Uehara, M., Samarasekera, I.V., Brimacombe, J.K. MATHEMATICAL MODELLING OF
UNBENDING OF CONTINUOUS CAST STEEL SLABS. (1986) Ironmaking and Steelmaking,
13 (3), pp. 138-153.
Henein, H., Brimacombe, J.K., Watkinson, A.P. EXPERIMENTAL STUDY OF
SEGREGATION IN ROTARY KILNS. (1985) Metallurgical transactions. B, Process
metallurgy, 16 (4), pp. 763-774.
Samarasekera, I.V., Bommaraju, R., Brimacombe, J.K. Mould heat transfer and
solidification in the continuous casting of steel billets. (1985) Electric
Furnace Conference Proceedings, pp. 249-274.
Takeuchi, E., Brimacombe, J.K. Effect of oscillation-mark formation on the
surface quality of continuously cast steel slabs. (1985) Metallurgical
transactions. B, Process metallurgy, 16 (3), pp. 605-625.
Richards, G.G., Brimacombe, J.K. Kinetics of the zinc slag-fuming process:
Part II. Mathematical model. (1985) Metallurgical transactions. B, Process
metallurgy, 16 (3), pp. 529-540.
Richards, G.G., Brimacombe, J.K. Kinetics of the zinc slag-fuming process:
Part III. Model predictions and analysis of process kinetics. (1985)
Metallurgical transactions. B, Process metallurgy, 16 (3), pp. 541-549.
Richards, G.G., Brimacombe, J.K., Toop, G.W. Kinetics of the zinc
slag-fuming process: Part I. Industrial measurements. (1985) Metallurgical
transactions. B, Process metallurgy, 16 (3), pp. 513-527.
Brimacombe, J. Keith, Gray, Neil B. Tools for the development of
metallurgical processes. (1985) AIMM bulletin, 290 (4), pp. 59-74.
Hawbolt, E.B., Chau, B., Brimacombe, J.K. Kinetics of austenite-ferrite and
austenite-pearlite transformations in a 1025 carbon steel. (1985)
Metallurgical transactions. A, Physical metallurgy and materials science, 16
(4), pp. 565-578.
Iyer, J., Brimacombe, J.K., Hawbolt, E.B. Prediction of the structure and
mechanical properties of control cooled eutectoid steel rods. (1985)
Mechanical Working & Steel Processing, pp. 47-58.
Haida, Osamu, Brimacombe, J.K. Physical-model Study of the Effect of Gas
Kinetic Energy in Injection Refining Processes. (1985) Transactions of the
Iron and Steel Institute of Japan, 25 (1), pp. 14-20.
Brimacombe, J.K., Bustos, A.A., Jorgensen, D., Richards, G.G. TOWARD A BASIC
UNDERSTANDING OF INJECTION PHENOMENA IN THE COPPER CONVERTER. (1985) [No
source information available]
Samarasekera, I.V., Brimacombe, J.K., Bommaraju, R. Mould behaviour and
solidification in the continuous casting of steel billets: ii. mould heat
extraction, mould-shell interaction and oscillation-mark formation. (1984)
Transactions of the Iron and Steel Society of AIME, 5, pp. 79-94.
Brimacombe, J.K., Samarasekera, I.V., Walker, N., Bakshi, I., Bommaraju, R.,
Weinberg, F., Hawbolt, E.B. MOULD BEHAVIOUR AND SOLIDIFICATION IN THE
CONTINUOUS CASTING OF STEEL BILLETS: I. INDUSTRIAL TRIALS. (1984)
Transactions of the Iron and Steel Society of AIME, 5, pp. 71-77.
Thomas, B.G., Samarasekera, J.V., Brimacombe, J.K. COMPARISON OF NUMERICAL
MODELLING TECHNIQUES FOR COMPLEX, TWODIMENSIONAL, TRANSIENT, HEAT-CONDUCTION
PROBLEMS. (1984) [No source information available]
Bommaraju, R., Brimacombe, J.K., Samarasekera, I.V. Mould behaviour and
solidification in the continuous casting of steel billets: III. Structure,
solidification bands, crack formation and offsquareness. (1984) Transactions
of the Iron and Steel Society of AIME, 5, pp. 95-105.
Venkateswaran, V., Brimacombe, J.K. Three-dimensional heat-flow model and
its role in the elimination of internal cracks in direct-chill casting.
(1984) [No source information available]
Brimacombe, J.K., Gray, N.B. TOOLS FOR THE DEVELOPMENT OF METALLURGICAL
PROCESSES. (1984) [No source information available]
Takeuchi, E., Brimacombe, J.K. FORMATION OF OSCILLATION MARKS IN THE
CONTINUOUS CASTING OF STEEL SLABS. (1984) Metallurgical transactions. B,
Process metallurgy, 15 (3), pp. 493-509.
Thomas, B.G., Samarasekera, I.V., Brimacombe, J.K. Comparison of numerical
modeling techniques for complex, two dimensional, transient heat-conduction
problems. (1984) Metallurgical transactions. B, Process metallurgy, 15 (2),
pp. 307-318.
Brimacombe, J.K., Meredith, S.E., Lee, R.G.H. High-pressure injection of air
into a peirce-smith copper converter. (1984) Metallurgical transactions. B,
Process metallurgy, 15 (2), pp. 243-250.
Bustos, A.A., Richards, G.G., Gray, N.B., Brimacombe, J.K. Injection
phenomena in nonferrous processes. (1984) Metallurgical transactions. B,
Process metallurgy, 15 (1), pp. 77-89.
Brimacombe, J.K., Meredith, S.E., Lee, R.G.H. HIGH-PRESSURE INJECTION OF AIR
INTO A PIERCE-SMITH COPPER CONVERTER. (1983) [No source information
available]
Haida, O., Brimacombe, J.K. PHYSICAL-MODEL STUDY OF SOLUTE INHOMOGENEITY IN
INJECTION REFINING PROCESSES. (1983) Scaninject-III, Luleå, June 15-17, 5:
1-5: 17.
Watkinson, A.P., Brimacombe, J.K. OXYGEN ENRICHMENT IN ROTARY LIME KILNS.
(1983) Canadian Journal of Chemical Engineering, 61 (6), pp. 842-849.
Agarwal, P.K., Pugh, R.W., Brimacombe, J.K. CASE STUDY OF SPRAY DESIGN FOR A
CONTINUOUS BILLET CASTER. (1983) Transactions of the Iron and Steel Society
of AIME, 3, pp. 37-51.
Hibbins, S.G., Brimacombe, J.K. CHARACTERIZATION OF HEAT TRANSFER IN THE
SECONDARY COOLING SYSTEM OF A CONTINUOUS SLAB CASTER. (1983) Transactions of
the Iron and Steel Society of AIME, 3, pp. 77-89.
Gorog, J.P., Adams, T.N., Brimacombe, J.K. HEAT TRANSFER FROM FLAMES IN A
ROTARY KILN. (1983) Metallurgical transactions. B, Process metallurgy, 14
(3), pp. 411-424.
Hawbolt, E.B., Chau, B., Brimacombe, J.K. KINETICS OF AUSTENITE-PEARLITE
TRANSFORMATION IN EUTECTOID CARBON STEEL. (1983) Metallurgical transactions.
A, Physical metallurgy and materials science, 14 (9), pp. 1803-1815.
Henein, H., Brimacombe, J.K., Watkinson, A.P. MODELING OF TRANSVERSE SOLIDS
MOTION IN ROTARY KILNS. (1983) Metallurgical Transactions B (Process
Metallurgy), 14 (2), pp. 207-220.
Henein, H., Brimacombe, J.K., Watkinson, A.P. EXPERIMENTAL STUDY OF
TRANSVERSE BED MOTION IN ROTARY KILNS. (1983) Metallurgical Transactions B
(Process Metallurgy), 14 (2), pp. 191-205.
Samarasekera, I.V., Brimacombe, J.K. THERMAL AND MECHANICAL BEHAVIOUR OF
CONTINUOUS-CASTING BILLET MOULDS. (1982) Electric Furnace Conference
Proceedings, pp. 136-155.
Samarasekera, I.V., Brimacombe, J.K. INVESTIGATION OF MOULD-RELATED QUALITY
PROBLEMS IN CONTINUOUS BILLET CASTING USING MATHEMATICAL MODELS. (1982)
Proceedings of the Process Technology Conference, pp. 283-295.
Brimacombe, J.K., Hawbolt, E.B., Weinberg, F. METALLURGICAL INVESTIGATION OF
CONTINUOUS-CASTING BILLET MOULDS. (1982) Transactions of the Iron and Steel
Society of AIME, 1, pp. 29-40.
Hawbolt, E.B., Weinberg, F., Brimacombe, J.K. METALLURGICAL INVESTIGATION OF
CONTINUOUS-CASTING BILLET MOULDS. (1982) Transactions of the Iron and Steel
Society of AIME, 1, pp. 41-60.
Lait, J.E., Brimacombe, J.K. SOLIDIFICATION DURING CONTINUOUS CASTING OF
STEEL. (1982) Transactions of the Iron and Steel Society of AIME, 1, pp.
1-13.
Watkinson, A.P., Brimacombe, J.K. LIMESTONE CALCINATION IN A ROTARY KILN
(1982) Metallurgical transactions. B, Process metallurgy, 13 (3), pp.
369-378.
Gorog, J.P., Adams, T.N., Brimacombe, J.K. REGENERATIVE HEAT TRANSFER IN
ROTARY KILNS. (1982) Metallurgical transactions. B, Process metallurgy, 13
(2), pp. 153-163.
Samarasekera, I.V., Brimacombe, J.K. INFLUENCE OF MOLD BEHAVIOR ON THE
PRODUCTION OF CONTINUOUSLY CAST STEEL BILLETS. (1982) Metallurgical
transactions. B, Process metallurgy, 13 (1), pp. 105-116.
Samarasekera, I.V., Anderson, D.L., Brimacombe, J.K. THERMAL DISTORTION OF
CONTINUOUS-CASTING BILLET MOLDS. (1982) Metallurgical transactions. B,
Process metallurgy, 13 (1), pp. 91-104.
Samarasekera, I.V., Brimacombe, J.K. THERMAL AND MECHANICAL BEHAVIOUR OF
CONTINUOUS-CASTING BILLET MOULDS. (1982) Ironmaking and Steelmaking, 9 (1),
pp. 1-15.
Samarasekera, I.V., Brimacombe, J.K. THERMAL AND MECHANICAL BEHAVIOUR OF
CONTINUOUS-CASTING BILLET MOULDS. (1981) Proceedings of the Process
Technology Conference, pp. 2-21.
Ashman, D.W., McKelliget, J.W., Brimacombe, J.K. Mathematical model of
bubble formation at the tuyeres of a copper converter. (1981) Canadian
Metallurgical Quarterly, 20 (4), pp. 387-395.
Agarwal, Prakash K., Brimacombe, J.K. MATHEMATICAL MODEL OF HEAT FLOW AND
AUSTENITE-PEARLITE TRANSFORMATION IN EUTECTOID CARBON STEEL RODS FOR WIRE.
(1981) Environmental Conference, Proceedings of the Technical Association of
the Pulp and Paper Industry, pp. 137-157.
McKelliget, J.W., Cross, M., Gibson, R.D., Brimacombe, J.K. MATHEMATICAL
MODELLING OF SUBMERGED GAS JETS. (1981) Environmental Conference,
Proceedings of the Technical Association of the Pulp and Paper Industry, pp.
349-372.
Brimacombe, J.K., Agarwal, P.K., Baptista, L.A., Hibbins, S., Prabhakar, B.
SPRAY COOLING IN THE CONTINUOUS CASTING OF STEEL. (1980) Proceedings -
National Open Hearth and Basic Oxygen Steel Conference, pp. 235-252.
Brimacombe, J.K., Hawbolt, E.B., Weinberg, F. FORMATION OF OFF-CORNER
INTERNAL CRACKS IN CONTINUOUSLY-CAST BILLETS. (1980) Canadian Metallurgical
Quarterly, 19 (2), pp. 215-227.
Agarwal, Prakash K., Brimacombe, J.K. MATHEMATICAL MODEL OF HEAT FLOW AND
AUSTENITE-PEARLITE TRANSFORMATION IN EUTECTOID CARBON STEEL RODS FOR WIRE.
(1980) Proceedings of the Society of Photo-Optical Instrumentation Engineers
Hoefele, E.O., Brimacombe, J.K. FLOW REGIMES IN SUBMERGED GAS INJECTION.
(1979) Metallurgical Transactions B (Process Metallurgy), 10 (4), pp.
631-648.
Brimacombe, J.K., Samarasekera, Indira V. Thermal field in continuous
casting moulds. (1979) I & SM, 6 (10), pp. 20-27.
Samarasekera, I.V., Brimacombe, J.K. Thermal field in continuous-casting
moulds. (1979) Canadian Metallurgical Quarterly, 18 (3), pp. 251-266.
Brimacombe, J.K., Weinberg, F., Hawbolt, E.B. Formation of longitudinal,
midface cracks in continuously-cast slabs. (1979) Metall Trans B, 10 (2),
pp. 279-292.
Hawbolt, E.B., Weinberg, F., Brimacombe, J.K. Influence of hot working on
internal cracks in continuously-cast steel billets. (1979) Metall Trans B,
10 (2), pp. 229-236.
Samarasekera, I.V., Brimacombe, J.K. Continuous-casting mould. (1978) Int
Met Rev, 23 (6), pp. 286-300.
Brimacombe, J.K., Watkinson, A.P. Heat transfer in a direct-fired rotary
kiln - 1. Pilot plant and experimentation. (1978) Metall Trans B, 9 (2), pp.
201-208.
Watkinson, A.P., Brimacombe, J.K. Heat transfer in a direct-fired rotary
kiln - 2. heat flow results and their interpretation. (1978) Metall Trans B,
9 (2), pp. 209-219.
Sorimachi, K., Brimacombe, J.K. Improvements in mathematical modelling of
stresses in continuous casting of steel. (1977) Ironmaking and Steelmaking,
4 (4), pp. 240-245.
Venkateswaran, V., Brimacombe, J.K. Mathematical model of the sl/rn direct
reduction process. (1977) Metall Trans B, 8 (3), pp. 387-398.
Brimacombe, J.K., Sorimachi, K. CRACK FORMATION IN THE CONTINUOUS CASTING OF
STEEL. (1977) Metall Trans B, 8 (3), pp. 489-505.
Barton, R.G., Brimacombe, J.K. Influence of surface tension-driven flow on
the kinetics of oxygen absorption in molten copper. (1977) Metall Trans B, 8
(3), pp. 417-427.
Wilkomirsky, I.A., Watkinson, A.P., Brimacombe, J.K. KINETICS OF OXIDATION
OF MOLYBDENITE. (1977) Transactions of the Institution of Mining and
Metallurgy, Section C: Mineral Processing and Extractive Metallurgy, 86, pp.
c16-c22.
Grill, A., Brimacombe, J.K. Influence of carbon content on rate of heat
extraction in the mould of a continuous-casting machine. (1976) Ironmaking
and Steelmaking, 3 (2), pp. 76-79.
Oryall, G.N., Brimacombe, J.K. PHYSICAL BEHAVIOR OF A GAS JET INJECTED
HORIZONTALLY INTO LIQUID METAL. (1976) Metall Trans B, 7 (3), pp. 391-403.
Grill, A., Sorimachi, K., Brimacombe, J.K. HEAT FLOW, GAP FORMATION AND
BREAK-OUTS IN THE CONTINUOUS CASTING OF STEEL SLABS. (1976) Metall Trans B,
7 (2), pp. 177-189.
Brimacombe, J.K. DESIGN OF CONTINUOUS CASTING MACHINES BASED ON A HEAT-FLOW
ANALYSIS: STATE-OF-THE-ART REVIEW. (1976) Canadian Metallurgical Quarterly,
15 (2), pp. 163-175.
Grill, A., Brimacombe, J.K., Weinberg, F. MATHEMATICAL ANALYSIS OF STRESSES
IN CONTINUOUS CASTING OF STEEL. (1976) Ironmaking and Steelmaking, 3 (1),
pp. 38-47.
Wilkomirsky, I.A., Watkinson, A.P., Brimacombe, J.K. Recirculating
fluidized-bed process for the roasting of molybdenite concentrates. (1975)
Transactions of the Institution of Mining and Metallurgy, Section C: Mineral
Processing and Extractive Metallurgy, 84 (829), pp. c197-c205.
Van Drunen, G., Brimacombe, J.K., Weinberg, F. Internal cracks in
strand-cast billets. (1975) Ironmaking and Steelmaking, 2 (2), pp. 125-133.
Lait, J.E., Brimacombe, J.K., Weinberg, F. Pool profile, liquid mixing and
cast structure in steel, continuously cast in curved moulds. (1974)
Ironmaking and Steelmaking, 1 (1), pp. 35-42.
Lait, J.E., Brimacombe, J.K., Weinberg, F. Mathematical modelling of heat
flow in the continuous casting of steel. (1974) Ironmaking and Steelmaking,
1 (2), pp. 90-97.
Brimacombe, J.K., Stratigakos, E.S., Tarassoff, P. MASS TRANSFER BETWEEN A
HORIZONTAL, SUBMERGED GAS JET AND A LIQUID. (1974) Metall Trans, 5 (3), pp.
763-771.
Lait, J.E., Brimacombe, J.K., Weinberg, F. Comparison of calculated and
observed liquid pool profiles and pool depths in the continuous casting of
steel. (1973) [No source information available]
Lait, J.E., Brimacombe, J.K., Weinberg, F., Muttitt, F.C. Liquid pool
geometry and cast structure in continuously cast blooms and beam blanks at
the Algoma Steel Corporation. (1973) Open Hearth Proc Metall Soc AIME, 5,
pp. 269-302.
Lait, J., Brimacombe, J.K., Weinberg, F. Pool profile, liquid mixing and
cast structure in steel, continuously cast in curved molds. (1973) [No
source information available]
Morton, S.K., Weinberg, F., Brimacombe, J.K. Continuous Casting of Steel -
1, 2. (1973) J Iron Steel Inst (London), 211 (1), pp. 13-33.
|